1.All System Diagnosis

This LAUNCH diagnostic scanner can establish a data link to all systems and subsystems of the vehicle being serviced to:
-Retrieve ECU information of the tested control units including unit type, version numbers, and other specifications, etc.
-Read & erase DTCs to locate problem areas and clear the codes.
-View Live Data of each parameter item.
The following is a list of modern vehicle systems that this scan tool can get access to:
-Engines / Auto Transmission / Airbags / Immobilizer / Key Coding / ABS / Cruise Control / Instruments / Self Leveling Suspension systems
-Seats / Doors / Gateway / Steering Angle / Air Suspension / Body Systems / Electronic Power Steering & Motor Assisted / Power Steering / Tyre Pressure / Rain Sensors / 4WD System
-Stabilizer / Intelligent Parking Assist/Door Motors / Audio Systems / Air Conditioning / Tiptronic / Anti Theft / Soft Top / Headlamp Leveling / Central Locking / Automatic Clutch / DPF Reset
-Electric Windows / Plip Programming / Heated Rear Window / Xenon Headlights / Wash Wipe / Fuel Burning Heater / Transfer Box / Seat Memory / Oil Life Service Reset / Sliding Doors / Electronic Throttle
-Navigation System / Rollover Sensor / Cruise Control / Multi Function Steering Wheel / Aux Heating / Electronic Parking Brake / Clutch Electronics ... and more.
This comprehensive scanning process is able to locate the faulty systems and retrieve the DTCs related easily. So you can work on all parts of the vehicle systems to enhance the performance, save energy, reduce emissions, and everything else.

2.31+ Reset Functions

①Oil Reset Service - Close the oil service light and reset service mileage & service interval after replacing the engine oil.
②Steering Angle Calibration - Clear memories of the previous steering angle sensor and store the replaced one.
③Electronic Parking Brake Reset - Reset the new electronic parking brake for braking wheels safely again.
④Battery Register & Battery Maintenance - Perform a reset on the vehicle battery for clearing the fault information and re-match the battery.
⑤ABS Bleeding - Get a firm brake pad after air exhaustion.
⑥Electronic Throttle Position Reset & Learn - Initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately.
⑦Diesel Particulate Filter (DPF) Regeneration - Clear particulate matter from the DPF filter to stabilize the filter performances
⑧Tire Pressure Monitor System Reset - Relearn TPMS sensors so that new sensors can be recognized by ECU.
⑨Tooth Learning - Finish tooth learning after changing crankshaft in the car engine, so the new part can be used.
⑩Anti-Theft Matching (IMMOBILIZER) - Add a new programmed key. PIN code is required
⑪Injector matching - Write the new injector numbers into the ECU for accurate communication and injection control.
⑫AFS Reset - It detects the light of the environment, then decides whether to automatically turn on the headlights or not. It can also adjust the headlights in time by monitoring the driving speed and body posture of the vehicle.
⑬EGR Adaption - Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.
⑭Gearbox Matching - Test the gearbox based on the driving conditions after the gearbox is disassembled or repaired, for a more comfortable and ideal shift quality.